Vis Charpente Bois Klimas, 6 x 60 mm, Empreinte Torx, Tête Disque, Blister 10 Pièces

Vis Charpente Bois Klimas, 6 x 60 mm, Empreinte Torx, Tête Disque, Blister 10 Pièces

➡️ Product Overview

TORX TORX 6x60 Tablet Drives for Wood 10pcs BWKCP-06060 KLIMAS. Original product from the renowned company Screw-Met. Size: 6 x 60 mm. Packaging: 10pcs. Manufacturer code: BWKCP-06060. Screws from the official distributor of Screw-met.

➡️ Description

The screws are designed to assemble wooden and wood-based elements (particle boards, plywood, MDF boards, OSB panels). They significantly facilitate and accelerate the work without requiring pre-drilling. The TORX socket effectively prevents the bit from slipping during screwing.

➡️ Technical Parameters

Dimensions of the screw (Lw x dw) - 6 x 60 mm. Diameter of the screw (dw) - 6 mm. Length of the screw (Lw) - 60 mm. Usable thread length (Lg) - 35 mm. Diameter of the screw head (Dw) - 14 mm. Thickness of protective coating - 8 µm. Material - low carbon electro-galvanized steel. Type of socket - TX-30.

➡️ Features and Benefits

Thanks to the special wax coating, the torque value is significantly reduced. Assembly is quicker and easier, and the battery life of the tools is extended. We produce screws with lengths up to 400 mm, allowing components with a thickness of up to 260 mm to be fixed. The washer head provides resistance to pull-out and secures the connection. The TX socket ensures optimal torque transmission. The countersink reduces the torque needed for screwing by widening the hole in the attached element. Special cutting notches on the thread cut the fibers of the wood structure when screwing. The special shape of the milling tip reduces resistance during screwing by up to 20%, prolonging the battery and tool life. The special shape of the milling tip allows a reduction in resistance during screwing by 20%, prolonging the battery and tool life. The additional spirals of the tip facilitate screwing; they allow for quicker capture of the wood with less pressure. The high torque allows screws to be driven without pre-drilling, even in hard wood.

➡️ DOUBLE TAP - Faster Installation

The additional spirals of the tip allow for quicker capture of the wood during the first phase of screwing. This advantage is particularly important for joints where tightening the screw is difficult. The double thread achieves the same effect with much less pressure.

➡️ Up to 40% Faster Screwing Time

In tests conducted before the product launch, we confirmed that the new shape of the screw tip leads to a reduction in screwing time of up to 40% for the same load. The extent of savings depends on the type of joint and the wood used.

➡️ Reduction of Screwing Resistance by Up to 20%

The new shape of the milling tip reduces screwing resistance by up to 20%. This parameter is particularly important for professionals who use rechargeable tools daily, as it increases the battery life.

➡️ Certifications

European Certificate. The screws have been manufactured in accordance with EN 14592-2008 standard. This European standard specifies the requirements and testing methods for the materials, geometry, strength, rigidity, and durability (i.e., protection against corrosion) of fastening elements used in load-bearing wooden structures.

➡️ Old and New Tip

The manufacturer Klimas Wkręt-met has implemented a new shape for the milling tip of the screws (described above). In our offer, you will find other sizes of framing disk screws with lengths ranging from 30mm to 400mm, diameters from 3mm to 10mm, and other types of framing screws, spacers, self-tapping screws, as well as dowels, screwdriver bits, along with the rest of the assortment from the framing, roofing, and construction industries.