Smart Switch, 63A DIY Smart ZigBee Switch Compatible with 15, Google Assistant, TUYA/Smart Life APP Remote Control, with Measurement, Voice Control and Time Function

ZIGBEE 3.0 PROTOCOL: This switch must be used with a TUYA ZigBee hub/gateway, otherwise it will not connect to a WiFi router. Maximum wiring capacity: 10mm² on the power side and on the load side. Relay Type: Latching Relay It can carry large currents. Applicable current scenarios: AC1, applied in circuits to control heaters, incandescent lamps, furnaces and other purely resistive loads. UNIVERSAL CONNECTED HOME DIY MODULE: Use the SY1 smart switch to switch small devices in your home from conventional to smart mode in less than 10 minutes. With this small ZigBee switch, you can turn a lamp, fan or extra heater into a connected object. APP REMOTE CONTROL: You can control your household appliances via the APP "Smart Life" or "TUYA". There are no restrictions on distance or time. The app "Smart Life" can be downloaded from the App Store and Google Play. Monitoring the positive active power of AC current: Analyzes the real-time and historical power consumption of connected devices, displaying the charging current, voltage and power in real time, and recording the data. Zigbee switch with voice control: the connected ZigBee switch is compatible with the voice command of Google Assistant, you can turn your devices on or off by voice command. With the SY1 switch, your hands are free. TEMPORIZATION: The smart switch has a timer mode. The connected universal switch saves you from forgetting to turn off your devices. Adjust the operating hours of your devices to your needs to avoid unnecessary energy loss and save energy. Easy to install and use: you can connect the smart switch to your devices in less than ten minutes. Simply press the cables and insert them to complete the wiring. Tightening and loosening the screws is very simple with the help of a screwdriver.