Multi-function RJ45 UTP Network Cable Tester, Ethernet Cable, 4 Inch IPS Touch Screen, Supports Network Tools, VFL, OPM, POE+ Detection, RJ45 TDR, Cable Length, NCV

Upgraded Network Cable Tester & Cable Tracer - Advanced UTP Cable Test - Tests UTP cable occupation, type, and remote kits and quickly detects errors at the near, middle, and far end of RJ45 cable connectors. Digital Ethernet Cable Tracer quickly finds the target cable (BNC, network cable, telephone cable and other metal cables) in entanglement. Interference signals and bad signals are reliably suppressed. RJ45 and UTP plotters operate on the same interface and accurately locate cables as a professional gauge for network applications to avoid misdiagnostics. OPM/VFL Multi-function cable tester with built-in optical power meter and visual error location. Optical Power Meter: Used for signal strength testing and insertion loss testing of different photoelectric devices and components. VFL as a professional fiber optic tester: The position of the error point of the optical fiber can be determined easily and accurately. POE++ Detection / Network Tools: The RJ45 PoE tester supports detection of IEEE 802.3BT/AT/AF protocols and non-standardized protocols. It displays the supply voltage, power ports and their polarity. In addition, the network tester has a built-in 1000m network port and many network tools such as IP detection, IP address scan, ping test, LLDP/CDP detection, port blinking and PPPoE selection. RJ45-TDR Cable Test & Length Measurement: Cable length meter makes it easy to check the condition of wire pairs, length, damping, reflection, impedance, duration difference and other cable parameters. In addition, you can measure interruptions in network cables (maximum measurement length: 3000m). A test report is drawn up. PD Power Detection & NCV & FTP Detection: PD power test checks whether the PoE switch output power is normal and which power ports are used. NCV Inductive Scan Function Dual acoustic and optical alarms that support the distinction between electrical conductors and neutral conductors. The FTP function allows you to copy test reports and data via a network FTP. Battery and Service: 4 inch IPS touch screen, resolution 800 x 480 pixels. The transmitter and receiver have a built-in battery (max. 3.7V, 4000mAh Li-ion Thanks to the long battery life, no battery changes are necessary. Of course, we offer you the best possible service for this professional LAN cable tester in the electronics industry, so you don't have to worry about anything.