Manual Pool Vacuum Cleaner with φ38 mm Hose 7.5 m Weighted Suction Head with Telescopic Pole 2.7 m and Rollers and Side and Lower Brushes

This manual vacuum cleaner mop is compatible with all vacuum filtration systems. It should be used with a running pool pump or the pool circulation system. Use with a sand filter gives the best results. Brush head with three diameters (1.220/1.496/45mm) - includes 7.5m (diameter 38mm) hose. Self-floating hose will not deform under suction pressure and floats on the surface of the water. One end is fixed and tight, to connect to the suction pump inlet hose; the other end rotates freely and connects to the suction head. This significantly reduces resistance during use. Easy to clean: The integrated ballast ensures a stable and firm contact with the bottom of the basin and prevents the mop from rising to the surface. The side and bottom bristles remove dirt and algae from the bottom particularly effectively. Removable Design includes 8-piece telescopic pole that can be combined freely up to a total length of 2.7 m. After use, it quickly disassembles for compact storage. Before storage, please rinse the pole segments and hose thoroughly and then allow them to dry completely. Suitable for private pools, spas, water parks, ornamental fish ponds and fountain ponds. Before cleaning, first brush the bottom of the pond with a stiff bristle brush to remove stubborn dirt, then remove large floating debris from the surface of the water beforehand.