1/5
Lot de 4 canon à mousse Orifice buse embouts et Lot de 10 mousse Maker universel 1 1 mm filetage buse et maille filtre
(20,95€/pc)
Dont éco-participation : 0,10 € TTC
Vous achetez pour votre entreprise ?
Tarifs négociés HT jusqu'à -20%
Produit similaire livré par
Scell-It – Buse mélangeuse standard pour cartouches de résine 300ml et 420ml – Lot de 12 pièces – Pour scellement chimique – VIBUSE
9,10 €
88
Vendu par Siecluxe
Ces articles peuvent vous intéresser !
Comparer à des articles similaires
Informations produit
Description
What you receive : you will get 10 pieces foam maker (mesh filter) et 4 pieces orifice nozzle tips (foam generator nozzle), which will enough pour you to utilisation et satisfy your various work needs
Size information : the foam maker measures approx. 0.62 inch in diameter et 0.41 inch in height, max pressure is 3000 PSI; The orifice nozzle tips: the male screw nozzles approx. 0.28 inch, orifice is 1.1 mm, the max pressure is 3000 PSI
Matériau Durable : our foam creator is Fabriqué en acier inoxydable, et the orifice is Fabriqué en brass, which is Durable pour you to utilisation with a long time, et you don't need to worry the utilisation effect
Practical remplacement : If foam cannon works not very well as before, maybe mesh filter wore down et foam cannon orifice tips blocked; You can replace them with ones et it will recover; We provide you 10 pieces of mesh filter pour your remplacement
Warm notice : please screw in the orifice nozzle tighten enough, or it is hard to get thick foam; The nozzle tips et foam maker will be a nice combination to help you work more efficient
How to replace foam maker
1. Pull the inner core out of plastique coat.
2. Pull out the plastique coat et find the foam maker.
3. Replace with one.
4. Install the plastique coat et inner core.
How to replace orifice nozzle
1. Unscrew quick connect plug.
2. Unscrew orifice nozzle with slot screwdriver.
3. Screw orifice nozzle.
4. Screw quick disconnect plug.
Specifications
Foam maker specifications
Diameter : 0.61 inch
Height : 0.41 inch
Working pressure is up to 3000 PSI
Orifice nozzle specifications
Orifice size : 1.1 mm, male NPT screw fitting, about 0.28 inch
Couleur : jaune
Matériau : copper + métal
colis contenu
10 x Foam maker (mesh filter)
4 x Orifice nozzle tips (foam generator nozzle)
Note
Serious injury may come from high pressure discharge produced by nettoyeur haute pressions. Please keep out of the reach of human body.
Seul le contenu du colis indiqué ci-dessus est inclus. Les autres produits ne sont pas inclus.
Remarque : Light shooting et different displays
Size information : the foam maker measures approx. 0.62 inch in diameter et 0.41 inch in height, max pressure is 3000 PSI; The orifice nozzle tips: the male screw nozzles approx. 0.28 inch, orifice is 1.1 mm, the max pressure is 3000 PSI
Matériau Durable : our foam creator is Fabriqué en acier inoxydable, et the orifice is Fabriqué en brass, which is Durable pour you to utilisation with a long time, et you don't need to worry the utilisation effect
Practical remplacement : If foam cannon works not very well as before, maybe mesh filter wore down et foam cannon orifice tips blocked; You can replace them with ones et it will recover; We provide you 10 pieces of mesh filter pour your remplacement
Warm notice : please screw in the orifice nozzle tighten enough, or it is hard to get thick foam; The nozzle tips et foam maker will be a nice combination to help you work more efficient
How to replace foam maker
1. Pull the inner core out of plastique coat.
2. Pull out the plastique coat et find the foam maker.
3. Replace with one.
4. Install the plastique coat et inner core.
How to replace orifice nozzle
1. Unscrew quick connect plug.
2. Unscrew orifice nozzle with slot screwdriver.
3. Screw orifice nozzle.
4. Screw quick disconnect plug.
Specifications
Foam maker specifications
Diameter : 0.61 inch
Height : 0.41 inch
Working pressure is up to 3000 PSI
Orifice nozzle specifications
Orifice size : 1.1 mm, male NPT screw fitting, about 0.28 inch
Couleur : jaune
Matériau : copper + métal
colis contenu
10 x Foam maker (mesh filter)
4 x Orifice nozzle tips (foam generator nozzle)
Note
Serious injury may come from high pressure discharge produced by nettoyeur haute pressions. Please keep out of the reach of human body.
Seul le contenu du colis indiqué ci-dessus est inclus. Les autres produits ne sont pas inclus.
Remarque : Light shooting et different displays
Caractéristiques
- MarqueSLOWMOOSE
- Marque compatibleUniversel(le)
- Poids1000 g
- Type de mélangeurMélangeur
- Réf. ManoManoME244564885
- MMID496480965090
- Réf. fabricant136020391009
- EAN136020391009
Comment choisir un malaxeur
Les conseils de nos experts
Vous êtes ici :



















