Chevilles A Expansion Klimas KRX-063540 6 x 30 Avec Vis 3,5 x 40, PZ2, Lot De 200

Chevilles A Expansion Klimas KRX-063540 6 x 30 Avec Vis 3,5 x 40, PZ2, Lot De 200

➡️ Product Details

Parts: 6x30 with Customer 3.5x40 Conversional PZ2 200pcs KRX-063540 KLIMAS.

Spanner pins with countersunk screw.

Dimension of pin: 6.0 x 30 mm.

Size of screw: 3.5 x 40 mm.

Packaging: 200 pieces.

Original product from the famous company Screw-Met.

➡️ Technical Parameters

Diameter of the pin [Dk]: Ø 6.0 mm.

Length of the pin [Lk]: 30 mm.

Diameter of the screw [Dw]: Ø 3.5 mm.

Length of the screw [Lw]: 40 mm.

Diameter of hole/drilling: 6 mm.

Maximum usable length [Tfix]: 10 mm.

Socket: PZ-2.

Number of pieces per package: 200.

Material of the pin: Polypropylene.

Material of the screw: Galvanized steel.

Substrate: Concrete, solid silicate brick, perforated ceramic brick.

➡️ Description and Intended Use

The KRX expansion bolt consists of a polypropylene sleeve and a countersunk head screw made of steel, covered with a protective layer of zinc.

It is designed for the installation of lightweight interior finishes, metal elements, lightweight installation elements, or mounting brackets in solid construction substrates.

The special design of the spacer bands ensures that the pin is firmly seated in the hole and prevents the sleeve from turning during screwing.

The inner part of the tee is equipped with guiding bands along its entire length, which ensures safe guidance of the screw during installation.

➡️ Features and Benefits

The PZ recess allows inserting the screw with a variety of available tools.

Special plastic tabs stabilize the sleeve in the hole, preventing it from turning during installation.

The special design of the spacer bands firmly clamps the pin and prevents it from turning once the screw is partially inserted.

The enlarged flange prevents the sleeve from being driven too deeply into the hole.

The guiding bands inside the sleeve ensure central guidance of the screw.

Galvanized, optimal corrosion protection for indoor applications.

➡️ Application

Fixing wooden interior fittings.

Fixing skirting boards.

Fixing house equipment.

Fixing cable trays.

Fixing cable bundles.

➡️ Installation Procedure

Before mounting, it is necessary to identify the substrate.

Before mounting, it is necessary to identify the substrate in which the pin must be installed and to compare the load that the pin will support with the load capacity indicated in the safety data sheet or national technical assessment.

The diameter of the drilling must be suitable for the wall material (the thickness of the fixed element corresponds to the maximum usable length of the pin - Tfix).

Use the correct drilling method according to the type of substrate (holes in cellular concrete masonry must be drilled with a non-hammer drill).

The diameter of the drilled holes must be adapted to the diameter of the pins used.

Holes in solid materials must be cleaned of burrs with a low-speed drill.

The pin is inserted into the drilled hole, and the screw is driven through the fixed element until it is fully driven into the sleeve (pre-mounting).

➡️ Certification

The KRX wall plugs benefit from a national technical assessment: ITB-KOT-2018/0528 edition 2.

The plugs we offer are of the highest quality and can be used without problems in the construction sector.

We strive to ensure that the products supplied to our clients are safe and suitable for specific tasks.

Other sizes and types of plugs and all types of screws are available in other auctions.