Automatic shutter stop – Door and gate – with screws and dowels – Stop closure for safety locking of the shutter – Maximum thickness 50 mm – Aluminium material colour: white

With this automatic shut-off system for shutters and doors, you can simply push your shutters to lock them in the open locking position. Mounting is simple: simply screw the adjustable stops against the wall aligned with your shutters, then adjust the thickness. The lever holds the flaps open by pushing. Closing and opening your shutters is a breeze. They are a comfort solution for locking your shutters and shutters. This support system is manual and is not motorized. The dimensions of the stop are in the product photo: 100 mm in length and 35 in height. The total weight of the product is 85g. Plugs and screws included. The stop can be adjusted from 5 to 50 mm depending on the thickness of your shutter. You only have to screw the removable part of the bracket using a screwdriver, adjustments to be made if possible with the shutter locked in the open position. This screw shutter accessory is suitable for shutters and shutters. It allows the latter to be locked in the open position by simple pressure. Its use is easy, and the lock is adjustable. The automatic stop can be attached to any type of surface, and is compatible with a large number of shutters, up to 5 cm thick. This bracket is for wall mounting. Drill two holes, screw the stop with the dowels, and you're done. Opens and closes automatically. The white finish will match the aesthetics of each home, discreetly dressing the exterior. This product is designed and manufactured in France, is almost universal since it is suitable for many shutters, is easy to install, and is reliable when opening and closing your shutters thanks to its simple, spring and pressure based operation.