2 Pack 1/8 PT Female Hose Fitting - Straight Union, Push to Connect Fittings, Apply to Pneumatic System (6mm ID, Gold)

Interlocking fittings are used for quick connection and repair of polyurethane or nylon tubes to change the direction of water flow between pipes. They are widely used for air compression systems, vacuum systems and pneumatic systems. The male thread connector is suitable for sliding connection of most polyethylene and nylon pipes, which reduces friction to improve water flow speed. Made of thick and durable brass, it has abrasion resistance, high pressure resistance. Push tube connection on one side and PT female thread on the other side. The elliptical release ring facilitates manual connection of the tube. This female quick connector is designed for easy and quick connection of water pipes. 2 x 6mm to 1/8 PT female connectors, total size of 26mm x 16mm/1.02 x 0.55 inch(L*W); Female thread size is 1/8 PT; Tube outer diameter is 6mm/0.24inch; The operating pressure is 0 to 9 Mpa; The operating temperature is 0 to 60 °C. Please note the appropriate temperature and pressure range to use and cut the hose flat, without slope. Insert the tube into the bottom of the fit and try to pull the tube, if it does not come out, it is a success. When loosening the tube, first check that there is no pressure in the tube, and then evenly press the end cap to the bottom.