Water Pressure Reducer 3/4 20/27 Inch DN 20 with Pressure Gauge and Filter, Reusable Brass Pressure Regulator

Made of dezinc-resistant brass, providing very high corrosion resistance and excellent heat resistance. Combined with a high-quality synthetic spring hood, it resists various types of corrosion caused by heat and moisture. This pressure reducer protects domestic water installations from excessive pressure. By balancing and optimizing variations in inlet pressure, it helps to avoid problems such as noisy pipes, high water bills and lack of hot water caused by excessive pressure. Stainless steel filters provide an exceptional filtration solution for water systems subject to extreme temperature ranges and differential pressures, with remarkable dirt absorption capacity and efficiency, allowing for repetitive cleaning cycles without compromising product integrity. The set pressure is directly displayed on the target value scale and can be adjusted by turning the adjustment knob with a minimum drop of 1 bar at each setting until reaching the desired pressure. In addition, the pressure gauge on the front provides accurate measurements and ensures consistent performance. Horizontal installation is recommended. However, it can also be installed in an upright position. The installation location should be easily accessible and provide sufficient space for cleaning, maintenance or adjustment. To form a closed system, a safety valve must be installed on the downstream side of the reducer to protect the equipment