Vacuum Chamber with Pump, 7.6L Acrylic Vacuum Chamber, 3 CFM Vacuum Pump, 150 cm Vacuum Hose, Complete Accessories, Use with Epoxy Resin and Silicone

This 3 CFM single-stage rotary vane pump achieves a final vacuum of 0.8 Pa (60 microns) for efficient drainage. Die-cast aluminum housing and rubber base make it lightweight and sturdy. A rear fan prevents overheating during prolonged use. The ergonomic handle with non-slip rubber coating makes it easy to carry. The clearly marked oil indicator shows the oil level at a glance. Perfect for your resin projects. This clear acrylic chamber provides ample space (23×16×21.5cm) for casting molds and medium sized parts. Thanks to the high-quality silicone seal, it remains waterproof and is designed for over 10,000 uses. The maximum working temperature of 176°F makes it sufficiently heat resistant for most degassing processes. Keep an eye on the entire degassing process at all times with clear acrylic. Reinforced vacuum hose with a length of 150 cm, directly compatible with SAE 1/4 inch vacuum pump. Compared with conventional transparent plastic pipes, this hose was developed to become a vacuum hose. It withstands a vacuum pressure of up to -29.92 inHg without deformation. Thanks to the rotating nozzles, the installation is simple and there is no need to constantly plug and unplug the hose. No additional purchase required - we deliver everything you need: 7.6L vacuum chamber, acrylic lid, pressure gauge set, 1.5m hose, 20×20cm silicone cushion and 250ml vacuum pump oil. Suitable for gas analysis, BHO and epoxy resin degassing. Not compatible with stabilised resins (e.g. Cactus Juice, Gator Venom, Minwax), alcohol, ethanol, vinegar as well as acrylic monomers and polymers. These solvents react chemically with the acrylic lid and can cause cracks. In case of using the mentioned solvents, we recommend the vacuum chamber with tempered glass lid.