Stone Paving Molds Turtle Concrete Patio Lawn Garden Driveway Pavement

How to use this concrete mold to build driveways: Step 1: Mix the cement with water according to the instructions provided in the package. When the concrete is ready to use, it has the consistency of oatmeal and is thick enough to hold an edge when you cut it into slices with a shovel. Step 2: Fill the mold with paving stone, shovel concrete with a shovel and be sure to fill each area. Step 3: Spread concrete around the mold with rubber gloves and fill in any deep gaps or places. Tap the mold with your hand to remove any air bubbles. Step 4: Smooth the concrete according to the contours of the mold and wipe off excess material. Step 5: Let the concrete harden for up to five minutes, then carefully remove the mold. For the next section, turn the mold a quarter turn and place it next to the paving you just finished. Tilt it slightly if you want to create a curved path. Step 6: After drying the concrete overnight, fill the cracks with soil and rinse off excess soil. Moisten the newly formed pavers so that they can sit better. Technical data: Material: ABS Colour: black. Dimensions: 44.5 x 38.5 x 3.8 cm/17.52 x 15.16 x 1.50 inches (approx.) Size after molding: 40 x 34 x 3.8 cm / 15.74 x 13.39 x 1.50 inches (approx.) What you get: Paving Stone Mold