Snow Blower Turbine Modification Kit, 3/8 Inch HD 3 Blades Universal Modifies 2 Stage Machine, Including Installation Hardware, Repeated and Durable

It is highly recommended to install a snow blower turbine kit on each blade, because changing some, but not all, blades will cause harmonic imbalance in the rotating turbine, which could easily cause excessive wear of the turbine shaft bearing. resulting in very expensive repairs. Depending on your degree of maneuverability, this kit can be installed in 1-2 hours without much difficulty. If you have a single-stage snow blower or your space is less than 1/4 inch or larger than 5/8 inch, you probably don't need or can't use this fix. Virtually eliminates clogged chute syndrome when moving wet or heavy snow. Install this snow blower impeller kit on your two-stage snowblower and never worry about another snowfall again. Please check the compatibility carefully before purchasing. The gap decreases the efficiency of the turbine's ability to propel snow up the chute, reducing the throwing distance, and the simple, fast and inexpensive solution is to modify the turbine blades by adding a reinforced rubber band to each of them. to close that gap.