Pneumatic Impact Wrench 1/2", Loosening Torque Max. 1,150.60 ft·lbs

Maximum 1560 NM loosening torque develops a maximum release torque of up to 1150.60 ft·lbs to facilitate the removal of wheel nuts and difficult screw assemblies. Its working torque of 270 to 590.05 ft·lbs is suitable for routine automotive maintenance, assembly and repair work. Dual hammer mechanism ensures smooth force transmission to the 1/2 inch drive square. With a no-load speed of up to 8000 rpm, the air wrench can quickly loosen and pre-tighten nuts and bolts. The selector on the rear allows you to choose between three power levels when in forward. A separate reverse position is provided for loosening. Adjustment is done quickly, without additional tools. This impact wrench operates with a working pressure of 6 bar and requires an average air flow of approximately 184 l/min. The 1/4 inch air inlet is compatible with common pneumatic installations. The compressor used must be able to provide the required pressure and air flow sustainably. With a length of approximately 18 cm, its compact body makes working in garages and workshops easy. The textured handle provides a stable grip, while the exhaust openings direct air down. A 1/4 inch pneumatic nozzle is included.