Manual Jacking Pump: 2.5MPa 25kg Water Pressure Tester (Manual Hydraulic Test Pump with G1/2 High-Pressure Hose)

Description:

1. Pipeline tester for manual hydraulic pressure testing. Equipped with a filter to prevent impurities from entering the pump. Pressure resistant hose, G1/2 standard closed connector

This is a high-quality hydrostatic pressure testing machine, very suitable for using water or hydraulic oil as the medium for pressure testing of various pressure vessels, pipelines, valves, and other industries. It can also provide the required pressure chemical, construction, pipeline, petroleum, coal, shipbuilding, and other industries for hydraulic power

The large dial reads clearly and is fashionable and generous. Pipe tester for manually testing hydraulic pressure. With a filter, A prevents contaminants from entering the pump. Thick gasket, strong air tightness

4. Suitable for pressure testing of various pressure vessels, pipelines, valves, etc. using water or hydraulic oil as the medium, and also providing the required pressure for hydraulic power; Suitable for chemical, construction, plumbing, petroleum, coal, shipbuilding and other industries

5. The normal tap water pressure is 0.3MPa, the residential high pressure is 0.4MPa, and the main water pressure is generally pressurized from 0.8MPa to 1.0MPa. (Tap water 0.1Mpa 1kg pressure)

Material: Metal

Pressure: 2.5 MPa

Flow rate: 13 ml/time

Item weight: 1.6 kg

Package size: 310 * 185 * 125mm/12.20 * 7.28 * 4.92 inches

Package weight: 1.7 kg

Package includes: 1 * test pump 1 set * accessories (4 * screws+4 * nuts+others)

Note:

Due to manual measurement, please allow a small error. Please make sure you don't mind before bidding

2. Colors may vary depending on the display. Please understand

Note:

Hello, please pay attention to your shipping address when purchasing products. 'If your receipt information (such as name, street, house number, doorbell/email without name, etc.) is incorrect, the order will not be delivered correctly.'