LED Stair Step Lighting 12V/24V 16 Tread RL-STEP-05 Complete Set of Dynamic Lighting Control LED Stair Lighting with 100W Power Supply and COB Light Strip

Complete kit, no complicated wiring: everything you need for installation is included. Simply assemble the following: 1. Attach the COB LED strips to the steps. 2. Place a PIR motion sensor at the top and one at the bottom. 3. Connect the COB LED strip lights to the controller. 4. Plug the power supply into the outlet. Installation is quite simple. Indoor Stair Lighting Kit with Motion Sensor: Motion-activated staircase LED lights automatically capture your movements, illuminate your stairs when people reach the top or bottom level, and turn off when people leave. The motion sensors have a range of 1.5 to 2 m, especially for dark stairs. Variable setting modes for staircase lighting: cascade mode, turn on or turn off all lights one after the other, turn on or turn off both levels, circular demonstration mode, etc. You can adjust the number of steps, brightness, speed, and delay time. You only need to understand that you can control the smooth dynamic effect of your stair lighting. Soft COB LED light, no bright spots: the indoor stair lighting kit is equipped with 16 flexible 50.8 cm COB LED strips with a width of 0.31 inches and a thickness of 0.25 cm. Wiring easily hides under the carpet or behind baseboards or moldings and does not take up space for staircase steps. It can be attached to the stair step with a self-adhesive backing. Low voltage daylight white light: interior stair lighting uses energy-saving COB LED strips as stair light source with high color rendering index, which is good for the human eye. 6W per tier, suitable for 20 inch wide stairs. 16 levels maximum. Give your staircase a beautiful and classic look.