Laser Level Self-Levelling Lazer with Tripod

laser level comes with a short tripod extendable up to 65 cm to help you find the horizontal line on a daily basis. This laser level also features a 6.35mm (1/4"-20") mounting thread, allowing you to replace a higher tripod for next level jobs. Note: Please place the tripod on a flat surface, then turn on the laser levels. Otherwise, the laser level will not level itself automatically and will flash continuously. self-leveling laser level uses an advanced upgraded version of the chip and adopts the green beam as the line. At equal power, the brightness of the green laser beam is twice that of the red laser. This leveller can be used both indoors and outdoors and allows more than 95% of construction work and everyday tasks to be carried out. The self-leveling cross laser level features self-leveling and manual modes. In self-leveling mode, lazer levels automatically level within a range of ±4°, projecting horizontal and vertical transverse lines, with a flashing indicator if out of range. In manual mode, automatic leveling is disabled and the cross line is locked for use at any angle. The self-leveling mode is ideal for aligning shelves, hanging boards or laying tiles, while the manual mode is suitable for angled or sloping installations. After turning on the laser level, you can adjust the brightness of the green light according to the environment for optimal performance. This laser level tool is ideal for installing shelves, doors, windows, woodworking, and hanging pictures and wallpapers. Lightweight and compact, it is easy to carry and is water and dust resistant (IP54). Easy to use, this laser level lights up instantly, allowing non-professionals to use it effortlessly. The laser level is guaranteed for one year (exchange and lifetime warranty). For any questions regarding the product, please feel free to contact us; we will respond within 24 hours. Package includes 1 x self-leveling laser level, 1 x compact aluminum tripod, 2 x AA batteries and 2 x user manuals. Class II laser, maximum power < 1mW. Just slide the pendulum to the "ON" position to switch to self-leveling mode. Beyond ± 4°, the laser tool will flash continuously to let you know. Slide the pendulum to the "OFF" position, hold the top button for 3 seconds to switch to manual mode, which will not flash at any angle. The self-leveling mode is ideal for users without DIY experience, and can be easily used by all.