Keero Robot Vacuum Cleaner Dual Nozzle Suction Power Cleaning Modes Trip Planning for Window Maintenance

The robot window cleaner offers a strong suction power. With rotary friction technique and dynamic vibrations, it ensures effective cleaning. Equipped with brushless motor, automatic pressure regulation and power off protection, it offers more uniform cleaning results compared to traditional window machines. Requires an electrical connection and the attachment of a safety rope. The dual nozzle system automatically sprays water and contains water tanks. Thanks to the advanced technology, deeper cleaning is achieved. In total, microfiber cloths are included, easy to clean and replace. Please read the instructions carefully. Three intelligent cleaning routes are available: top to bottom, left to right and right to left. The robot automatically schedules the cleaning route so that each area is cleaned. It is suitable for both large and small windows, saving you time to enjoy more time with your family. The window cleaner automatically detects the edges of the window and adjusts its route according to obstacles. Equipped with backup power battery, it can continue to work even in the event of a power failure, which ensures additional safety. In addition, the safety rope prevents falling. operation: it supports automatic control or manual control via the remote control. It is equipped with a long power cable and a long safety rope. It has a larger cleaning area and meets the needs of different families. Noise is controlled at decibels and noise is low. With a thickness of inches, the body is thinner and suitable for more types of windows. Before use, the robot must be connected to a power source and attached with its safety cord. This product detects frameless glass surfaces, but it is not recommended to use on these surfaces due to the risk of falling. Press and hold the button for more than seconds to start the robot. When switched on, the indicator lights up. Please check that the bottom cleaning ring is installed correctly. It is recommended to completely empty the water tank after each use in order to avoid clogging of the nozzles and extend the life of the product. Before use, spray water times on a dry cloth before turning on the device. If traces or water marks persist after wiping, replace the cloth and turn off the automatic water spray function using the remote control. Wipe again to remove marks. Spraying a small amount of glass cleaner onto the cloth or glass will achieve a flawless result.