Générateur de signaux JDS6600‑60M avec mesure de fréquence et alimentation AC100‑240V, prise UK

1、With output short‑circuit protection, all signal output can work 60s under load short‑circuit condition.

2、Simple operation panel, simple and intuitive operation. Independent control switch for easy control.

3、It is the great instrument for electronic engineering, laboratories, production lines, teaching and scientific research.

4、High reliability, large‑scale integrated circuit, surface mount technology, high dependability, long service life.

5、The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable. 6、High‑quality flame‑retardant shell, with bracket on the back, after erecting the bracket, it is more convenient to operate and view data. 7、High accuracy, dual channels with equal performance, continuously adjustable phase difference.

Condition: 100% Brand New

Item Type: Signal Generator

Material: ABS+Silicone

Color: As shown in the picture

Model: JDS6600-60M

Frequency Characteristics:

Sine Wave Frequency Range: 0-60MHz

Square Wave Frequency Range: 0-25MHz

Triangular Wave Frequency Range: 0-25MHz

Pulse Wave Frequency Range: 0~6MHz

TTL Digital Wave Frequency Range: 0~6MHz

Arbitrary Wave Frequency Range: 0~6MHz

Pulse Width Adjustment Range: 25nS-4000S

Square Wave Rise Time: ≤10ns

Minimum Frequency Resolution: 0.01μHz (0.00000001)

Frequency Accuracy: ±20ppm

Frequency Stability: ±1ppm/3 hours

Waveform Characteristics:

Waveform Types: Sine wave, square wave, pulse wave (adjustable duty cycle, pulse width and cycle time can be accurately adjusted), triangular wave, partial sine wave, CMOS wave, DC level (set the DC amplitude by adjusting the offset), half wave, full wave, positive staircase wave, inverse staircase wave, noise wave, exponential rise, exponential fall, multisonic wave, sinc pulse, Lorenz pulse, and 60 user-defined waveforms.

Wave Length: 2048 points

Waveform Sampling Rate: 266MSa/s

Waveform Vertical Resolution: 14 bits

Sine Wave:

Harmonic Suppression: 245dBc (<1 MHz); 240dBc (1 MHz~20MHz)

Total Harmonic Distortion: <0.8% (20Hz~20kHz, 0dBm)

Square Wave and Pulse Wave: Overshoot≤5%

Pulse Wave Duty Cycle Adjustment Range: 0.1%~99.9%

Partial Sine Wave Duty Cycle Adjustment Range: 0.1%-99.9%

Sawtooth Wave Linearity: ≥98% (0.01Hz~10kHz)

Output Characteristics:

Amplitude Resolution: 1mV

Amplitude Stability: ±0.5%/5 hours

Amplitude Flatness: ±5% (<10MHz); ±10% (>10MHz)

Wave Output:

Output Impedance: 50Ω± 10% (typical)

Protection: All signal output terminals can work within 60 under load short-circuit conditions

DC Offset:

Offset Adjustment Range: offset≤10-amplitude/2

Offset Resolution: 0.01 V

Phase Characteristics:

Phase Adjustment Range: 0~359.9°

Phase Resolution: 0.1°

TTL/CMOS output:

Low Level: <0.3V

High Level: 1V~10V

Level Rise/Fall Time: <20ns

External Measurement Function:

Frequency Counter Function:

Frequency Measurement Range: 1Hz~100MHz

Measurement accuracy: Continuous adjustment of gate time 0.01S~10s

Counter Function:

Counting Range: 0-4294967295

Coupling Mode: DC and AC coupling modes

Counting Method: Manual

Input Signal Voltage Range: 2Vpp~ 20Vpp

Pulse Width Measurement: 0.01us resolution, maximum measurable 20s

Period Measurement: 0.01us resolution, maximum measurable 20s

Scanning Function:

Scanning Channel: CH1 or CH2

Frequency Scanning Type: Linear scanning, logarithmic scanning

Scanning Time: 0.1s~999.9s

Setting Range: Arbitrarily set between the starting point (0.01Hz) and the maximum output frequency of the corresponding model at the end point

Scanning Direction: Forward, reverse and go there and back

Trigger Function:

Number of Pulses: 1-1048575

Trigger Mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)

General Technical Specifications:

Display Type: 2.4 inch TFT color LCD display

Storage and Loading:

Quantity: 100 groups

Location: 00 to 99 (the default storage location parameter of 00 is called when the machine is turned on)

Arbitrary Waveform: Quantity: 60 groups from 1 to 60 (the default is 15 groups at startup)

interface:

Interface Mode: Using USB to serial interface

Expansion Interface: Serial port with TTL level mode, convenient for users to develop

Communication Rate: Using standard 115200bps

Communication Protocol: Using commanding line mode, the protocol is open

voltage:

Input: AC100-240V (50/60Hz)

Output: DC5V±0.5V

Environmental Conditions Temperature: 0-40 ℃ Humidity: <80%

1 x Signal Generator

1 x Power Adapter

1 x USB Cable

2 x Signal Connection Cable

1 x English Manual

1 x CD

1 x BNC Cable