Générateur de Signaux DDS JDS2900-60M 2CH avec Fonction d'Onde Arbitraire et Alimentation AC100-240V

1、Use DDS direct synthesis technology to produce accurate and low‑distortion output signals.

2、Surface mount technology, large-scale integrated circuit, high reliability and long service life.

3、High-quality flame-retardant shell, silicone shortcut keys, beautiful and generous, after erecting the bracket, it is more convenient to operate and view data.

4、High accuracy, with output short-circuit protection capability, all signal output terminals can work for 60S under load short-circuit conditions.

5、Clear operation interface, with independent control switches, widely used in electronics enthusiasts, scientific research institutions and high-tech enterprises. 6、Portable dual‑channel DDS function/arbitrary waveform generator, dual‑channel equal performance, 360‑degree continuously adjustable phase difference. 7、Use sine waves, square waves, sawtooth waves, or arbitrary waves to generate pulse train, and the number of pulse period is continuously adjustable between 0-1048575. 8、It integrates the functions of function signal generator, arbitrary wavesform generator, pulse signal generator, noise generator, signal measurement, counter and frequency sweep.

Condition: 100% Brand New

Item Type: Signal Generator

Material: Silicone, ABS (Flame Retardant)

Model: JDS2900-60M

Frequency Characteristics:

Sine Waves Frequency Range: 0-60MHz

Square Waves Frequency Range: 0-25MHz

Triangular Waves Frequency Range: 0-25MHz

Pulse Waves Frequency Range: 0-6MHz

TTL Digital Waves Frequency Range: 0-6MHz

Arbitrary Waves Frequency Range: 0-6MHz

Pulse Width Adjustment Range: 25nS-4000S

Square Waves Rise Time: ≤10ns

Minimum Frequency Resolution: 0.01μHz (0.00000001)

Frequency Accuracy: ±20ppm

Frequency Stability: ±1ppm/3 Hours

Waves Characteristics:

Waveform Types: Sine waves, square waves, pulse waves (adjustable duty cycle, pulse width and cycle time can be accurately adjusted), triangular waves, partial sine waves, CMOS waves, DC level (set the DC amplitude by adjusting the offset), half waves, full waves, positive staircase waves, inverse staircase waves, noise waves, exponential rise, exponential fall, multi-sonic waves, Sinker pulse, Lorentz pulse, and 60 user-defined waveforms.

Waves Length: 2048 Points

Waveform Sampling Rate: 266MSa/S

Waveform Vertical Resolution: 14 Bits

Sine Waves: Harmonic Suppression: 245dBc (<1 MHz); 240dBc (1 MHz-20MHz)

Total Harmonic Distortion: <0.8% (20Hz-20kHz, 0dBm)

Square Waves and Pulse Waves: Overshoot≤5%

Pulse Waves Duty Cycle Adjustment Range: 0.1%-99.9%

Partial Sine Waves Duty Cycle Adjustment Range: 0.1%-99.9%

Sawtooth Waves Linearity: ≥98% (0.01Hz-10kHz)

Output Characteristics:

Sine Waves Amplitude Range: Frequency ≤10MHz, 2mVpp-20Vpp

Square Waves/Triangular Waves Amplitude Range: Frequency ≤10MHz, 2mVpp-20Vpp

Amplitude Resolution: 1mV

Amplitude Stability: ±0.5%/5 Hours

Amplitude Flatness: ±5% (<10MHz); ±10% (>10MHz)

Waves Output:

Output Impedance: 50Ω± 10% (Typical)

Protection: All signal output terminals can work within 60 under load short-circuit conditions

DC Offset:

Offset Adjustment Range: Offset≤10-Amplitude/2

Offset Resolution: 0.01 V

Phase Characteristics:

Phase Adjustment Range: 0-359.9°

Phase Resolution: 0.1°

TTL/CMOS Output: Low Level: <0.3V

High Level: 1V-10V

Level Rise/Fall Time: <20ns

External Measurement Function:

Frequency Counter Function: Frequency Measurement Range: 1Hz-100MHz

Measurement Accuracy: Continuous Adjustment of Gate Time 0.01s-10s

Counter Function: Counting Range 0-4294967295

Coupling Mode: DC and AC Coupling Modes

Counting Method: Manual

Input Signal Voltage Range: 2Vpp-20Vpp

Pulse Width Measurement: 0.01us Resolution, Maximum Measurable 20s

Period Measurement: 0.01us Resolution, Maximum Measurable 20s

Sweep Function:

Sweep Channel: CH1 Or CH2

Frequency Sweep Type: Linear Sweep, Logarithmic Sweep

Sweep Time: 0.1s-999.9s

Setting Range: Arbitrarily set between the starting point (0.01Hz) and the maximum output frequency of the corresponding model at the end point

Sweep direction: forward, reverse and round trip

Burst Function:

Number of Pulses: 1-1048575

Burst Mode: Manual Trigger, CH2 Trigger, External Trigger (AC), External Trigger (DC)

General Technical Specifications:

Display Type: 2.4in TFT Color LCD Display

Storage and Loading: Quantity: 100 Groups

Location: 00 - 99 (the default storage location parameter of 00 is called when the machine is turned on)

Number of Arbitrary Waveforms: 60 groups from 1 to 60 (15 groups by default)

Interface Mode: Using USB to serial interface

Expansion Interface: Serial port with TTL level mode, convenient for users to develop

Communication Rate: Using standard 115200bps

Communication Protocol: Using commands line mode, the protocol is open

Power Supply Voltage: Input: AC100-240V (50/60Hz)

Output: DC5V±0.5V

Environmental Conditions: Temperature: 0-40℃; Humidity: <80%

1 x Signal Generator

1 x Power Adapter

1 x USB Cable

2 x Signal Connection Cable

1 x English Manual

1 x CD

1 x BNC Cable