Fireplace Seal 3 x 10 mm x 3 m Fiberglass Stove

Fiberglass Self Adhesive Fireplace Seal This flat seal is designed to replace old gasket around a wood stove door, fireplace insert or other sealing area. It measures about 3mm thick, 10mm in width and 3m in length. Can be cut to your needs The length of 3 m allows you to cut the tape according to the dimensions of the area to be equipped. Before purchase, carefully measure the width, thickness and profile of the existing gasket to verify that this flat model fits your device. Heat resistance up to about 1.022°F The gasket is made of graphite impregnated fiberglass and is suitable for high heat areas around stove doors and frames. However, it must not be placed directly in contact with an open flame or used beyond the specified temperature. Installation with self-adhesive backing Completely remove the old seal as well as glue residue, dust and grease. The surface should be clean, dry and even. Then cut out the necessary length, remove the protective film and firmly press the seal along its entire length. For better sealing When properly selected and installed, the seal can help limit smoke, ash and air passages around the door. It also helps maintain a more even contact between the door and its frame. Possible applications Suitable for many wood stoves, fireplace inserts, stove doors, fireplaces, ducts and other appliances using a compatible flat seal. It does not automatically replace a round cord or gasket with different dimensions. Important note Compatibility depends on the shape of the groove, the dimensions of the original seal and the condition of the surface. Always check the measurements before ordering and follow the recommendations of your device. Box contents: 1 x fiberglass self adhesive fireplace seal approx. 3 x 10 mm x 3 m.