EU Wireless Switch Self Powered Wireless Button Switch Kit Two-Way Wireless Kinetic Switches Battery-Free Radio Remote Control (White 1Gang 5V1)

Wireless switch without batteries. No batteries or Wi-Fi are required. A simple tap of the control panel converts the kinetic energy of your finger into electrical energy, emitting a wireless signal to turn the light on or off. (Do not install inside a metal housing, as metal blocks the signal and prevents its functioning!) Our transmitter (control panel) has been tested by professionals and its service life reaches 600,000 presses, far exceeding the industry average. Easy installation: No rewiring is required for the control panel. Simply connect the receiver to the phase and neutral wires of the luminaire to be controlled, and then press the control panel to turn the light on or off. The product is pre-coded at the factory to avoid coding conflicts, you can use it immediately! (The original wall switch must be powered to work.) This wireless remote control offers a powerful signal, capable of passing through walls and doors, and controlling lights within about 30m indoor (about 100m outdoor). It is ideal for controlling the lighting of homes, offices, factories, garages, etc. (Metal doors block the signal.) Create your own wireless lighting system. A single receiver can be connected to multiple control panels, e.g. for stairs, bedroom entrances or bedside tables, when multiple panels are needed to handle different lighting. The different wireless switches do not interfere with each other and do not cause signal conflict, allowing you to create the ideal lighting system for your home. This self-powered wireless remote only consumes a few milliamps via its transmitter (control panel), allowing it to work normally even in humid environments like bathrooms and patios. Simply press the control panel to turn the lights on and off remotely. Wide Voltage Range Receiver: AC 100-240V (compatible with most countries in the world), rated power: 10A