DIN-Rail Ethernet Surge Protection 100Mbps POE 1-2-3-6 for Switch, Router, Surveillance Camera, Network Device

Surge Protection - Ethernet surge protector protects your network devices from damage caused by surges, such as routers, surveillance cameras, switches, servers and more. Input and output: "IN" is the input terminal, connected to the switch, etc. "OUT" is the output terminal, connected to protected devices, such as surveillance cameras, etc. Do not connect the opposite! PE to ground: the PE end of the POE surge protector must be reliably connected to the ground of the lightning protection system, and the grounding wire should be short, thick and straight. Grounding must comply with lightning protection specifications, ground resistance is less than 4 ohms. DIN RAIL The RJ45 network surge protector has a convenient hanging or rail mount design for quick and easy installation. Suitable for 36mm guide rails. Features: data rate(100Mbps) Protective pin (1/2/3/6) Rated voltage one (48 V). Maximum discharge current (5 KA). Fast response time (1ns). Operating temperature range (-25°C to +60°C)