Carte de Commande PLC MI2N‑20MR‑2U 220V, Transistor à Boîtier pour Automatisme Industriel

1、Widely used in the field of electronic control, compatible for Mitsubishi GX Work2 GX Developer.

2、Support super encryption function, unable to read the program to protect the results of labor.

3、Flash memory does not lose data when power off, high‑accuracy clock chip, an annual error of 30 seconds, can be maintained for six months after power off.

4、Excellent insulation and moisture‑proof, anti‑leakage, anti‑vibration, dust‑proof and anti‑corrosion.

5、Manual preliminary verification and verification, computer inspection and internal verification, all products undergo 72‑hour aging test before leaving the factory.

Item Type: PLC Industrial Control Board

Model: MI2N-20MR-2U 220V power supply

Input: 12 road NPN type including 2 road 60K high speed input

Output: 8 channels relay type 3A load can be connected to 220V

Core: FX2N 8000 steps compatible with 1N positioning instructions

Pulse Input: 2 60Khz X0-X1

Pulse Output: None

Power Supply: AC180-245V

Analog Input: 4AD 0-10V/0-20MA optional 12-bit accuracy 0-4095 can be changed to NTC 200 degrees temperature measurement

Analog Output: 2DA 0-10V/0-20MA, optional 12-bit accuracy 0-4095

Analog Usage: AD0-AD3 corresponds to D8030-D8033 DA0-DA1 corresponds to D8096~D8097

Direct operation of registers without commands, special registers can not directly participate in operations

Communication Port: RS232 MD8 round port DVP

RS485 terminal interface A+ B-

Software: GX Work2 GX Developer

Clock Type: High accuracy clock within 10 seconds of annual error

Clock Description: The plc with clock is with year, month, day, hour, minute and second. It has nothing to do with the counter.

Chip Model: STM32F103RCT6

PWM Description: PWM supports 1Khz by default

Precautions For PLC Use:

Programming Port Protocol: The programming port supports FX protocol by default

HMI Parameters: Baud Rate: 9600 data bits 7 stop bits 1 even parity

PLC without any settings

2N Support: 2000/4000/8000 steps

Power-off Retention: Flash memory will not lose data after power-off for 8 years

Keep Range: D200-D7999

It is recommended to keep the data more stable after D500

Encryption Function:

Support super password function (SCM encryption level)

Login Keywords: 12345678 activate the super password function

After activating the super password, only the new program can be overwritten, the original program cannot be read

About the usage of 1 N positioning instruction

Our 2N series products all support 1N instruction

Usage: Convert the program into 1N and write positioning instructions

Then turn to 2n and continue to write

The original 422 communication line cannot be used (see the download line label for 422 or SC09-FX if there is one, please change to the download line)

Use the download line of 232 communication to download the program.

Program Download Instructions:

New project--FX2N.--Choose the corresponding COM port-PLC write--click parameter+program--confirm within 8000 steps--execute--yes--download complete

Size: Approx. 74mm / 2.9in

112mm / 4.4in

126mm / 5in

1 x PLC Industrial Control Board