Bande Antidrapante - YYV - Phosphorescente - 50 mm x 5 m - Couleurs multiples - Intérieur/Extérieur

<p>Glowing Tip: Tape with green fluorescent stripes glows in the dark. This makes it easier to notice the edge of the step to prevent slipping and falling off at night.</p><p>Anti-Slip: The tape is made of 80 grain aluminum oxide for long-lasting, superior traction in slippery areas. So you dont have to worry about slipping and you feel safer going up and down stairs.</p><p>Permanent Adhesive and Residue: High-quality glue prevents cracking or peeling. Also, if you choose to replace or reposition the tape, there will be no residue and no damage to your floors.</p><p>Suitable for: Ideal for accentuating stair edges and dangerous steps. Such as loading ramp edges, basement stairs, cinema steps, bunk beds, stairs, ladders, garages and all other potentially hazardous areas.</p><p>Application and Size: Easy to install and use, just peel off the film and roll away air bubbles; Size: 50mm/2W x 5M/199L, glowing.</p><p>characteristic:</p><p><p>No residue after removal</p><p>Chemical and oil resistance</p><p>Strong waterproof adhesive</p><p>Glows in the dark for up to 8 hours.</p><p>Aggressive surface with 80 grit for high traction.</p><p>Main materials: crushed stone, paper, strong acrylic glue, fluorescent</p><p>Suitable for indoor and outdoor use:</p><p>Suitable for: Flat, clean, smooth, hard floors or surfaces (e.g. floors, stairs, steps, hallways, ramps, vehicle steps,</p><p>Emergency exit ladders, scaffolding, movie theater aisles, etc.) Not suitable for: rough, loose, damp, dusty or porous soils</p><p>how to use</p><p>1. When applying the tape, make sure the contact surface is flat, clean and dry.</p><p>2. Cut the tape to the desired length and round the corners with scissors.</p><p>3. Remove the protective paper and place the tape in the desired location. (If the temperature is low, please use a hair dryer to slowly heat it up, and the effect is good)</p><p>4. Pressure is applied evenly from the center of the tape to both ends. (wait 24 hours)</p><p>5. Expose the tape to a light source for a period of time to keep it glowing in the dark.</p><p>Other Tips</p><p>The tape absorbs for 30 minutes and the light source can light up for a while. (The more light absorbed, the easier it is to last, and then slowly fade away)</p><p>Dont worry if the light strip fades, it will be very bright soon after charging it with light.</p><p>interior stairs</p><p>Anti-slip tape adheres to all smooth surfaces. The high-performance adhesive forms an excellent bond for a secure hold. High friction slip resistance, performs well in light to heavy shoe traffic areas on irregular or contoured surfaces</p><p>outdoor stairs</p><p>Anti-slip tape reduces the risk of accidents in slippery areas. The PET base layer can withstand extreme temperatures (-10ºc to 60ºc / 14 F to 140 degrees). Will not crack, peel, or decompose when used in extreme hot or cold weather, ensuring long-term

durability in harsh weather conditions</p><p>Anti-slip tape</p><p>The 80-grit aluminum oxide traction pad enhances foot traction with a subtle texture to give you maximum protection without sacrificing comfort. Provides extra foot traction to protect your kids, family, seniors and pets on slippery surfaces and prevent

slipping!</p>