Anti-noise jacket for bicycle cables, 1.6 m, foam sleeve for brake and derailleur cables inside the frame, universal, durable and noise absorbing, routing kit

1.6 m sound-absorbing foam strip to cover brake and derailleur cables inside the frame: This specific tubular sleeve, made of flexible closed cell foam, is designed to wrap the metal sleeves of your brakes and derailleur inside the bike frame. With a length of 1.6 m, you have enough material to soundproof both the brake and derailleur cable of a typical bike. It reduces metal rattling and friction sounds that occur when the sheaths hit against the inner walls of the frame on bumps or during gear changes. Simple installation: simply put it on the end of the ducts and pass them through the frame: The assembly is very simple. Cut the strip to the required length. Then simply thread the strip over the end of the already installed metal sheath and slide it along the entire length of the sheath that passes through the frame. Because the foam is flexible, it follows the curves of the frame without any problems. Then pass the sheathed sheath as usual through the cable passages in the frame. Improves driving feeling by reducing vibrations and extraneous noise: The absorbent foam layer dampens vibrations and prevents direct metal-to-metal contact between the sheath and the frame. Thus, the characteristic metal rattling and the clicking noise, especially on bumpy descents or pavers, are considerably reduced or eliminated. This results in a quieter and better driving experience, with less extraneous noise. Protects the sheaths and paint of the frame from abrasion and damage: In addition to soundproofing, the sleeve also serves as a protective layer. It prevents moving metal sheaths from shaving or damaging over time paint on the inner walls of cable passages in carbon, aluminum or steel frames. This preserves the value of your frame and prevents possible weaknesses. Universally compatible with most bicycles with internal cable routing: The strap is designed for common diameters of brake and derailleur ducts and compatible with most bicycle frames with internal cable passage - whether road, gravel, mountain bike or e-bike.