Adjustable Foam Lance for Pressure Washer, 1.5 Litre Foam Lance with M22 Fittings and Quick Coupling 1/4", Wide Opening, Extra Orifice Nozzle 1.1 mm, 250 bar

MULTIPLE CONNECTION METHODS: The foam gun has a removable 1/4" quick connector. If your pressure washer gun is equipped with a 1/4" quick base, you can directly connect the 1/4" quick connector of the foam gun; if your gun is equipped with a M22 14mm female connector, you need to unscrew the 1/4" quick connector of the foam gun and connect the M22 14mm male connector. Unique and convenient connection methods to meet the different needs of your daily life. IMPROVED FEATURES: The working pressure of the pressure washer foam gun is between 70 and 250 bar (1000 to 3600 PSI). The bottle has a wide mouth for easy filling and an extra-wide neck to prevent cracks and leaks. The foam sprayer with 1/4 inch connection has a capacity of 1.5 litres. A larger capacity foam cannon allows you to increase the number and duration of cleanings. UNIQUE DESIGN: A comfortable and unique foam bottle, specially designed to be held by hand. When holding the foam cannon, replacing the bottle is also very comfortable and non-slip. ADDITIONAL ORIFICE NOZZLE: The pressure washer foam gun has a 1.1mm reciprocating orifice nozzle. You can use the 1.1mm nozzle when your pressure is below 100 bar (1500 PSI), as it produces thicker foam. If your pressure exceeds 100 bar (1500 PSI), please use the original nozzle. EASY INSTALLATION: Fill the bottle with detergent and warm water, connect the barrel to the gun via the 1/4" quick connector, then adjust the dial to the desired foam density. After use, turn the dial to "+" and spray clear water for 10 seconds to clean the residue and avoid clogging in the orifice nozzle and foam generator, otherwise it will be easily clogged by the remaining soap.