5KW Wood Pellet Heater for Spa with Titanium Heat Exchanger 5KW Pellet Heater for Outdoor Spas and Nordic Baths, 16L Tank, Up to 7 Hours Battery Life

The flame passes through the titanium heat exchanger coil, while the included pump circulates water between the heater and the spa. Suitable for inflatable spas, wooden Nordic baths and stock tank type spas. Actual heating time depends on water volume, initial temperature, outside temperature and insulation. The concentrated flame path uses gravity-fed wood pellets to produce even and efficient heat, without a high power electric heating element. No gas connection. However, the circulation pump requires a suitable electrical outlet. Use only dry wood pellets of the recommended size. The large 16-litre tank allows up to approximately 7 hours of continuous operation depending on the conditions, which reduces the frequency of recharging during heating. Actual range varies depending on pellet size, fuel quality, air supply, feed speed and weather conditions. The titanium heat exchanger coil offers high resistance to contact with water in pools and spas, while the stainless steel casing is made of stainless steel. is designed for use Outdoor. Make sure to maintain proper water quality and empty the system fully before freezing periods or prolonged storage. The heater is installed outside the spa and uses the included pump to circulate the water through the titanium coil. For outdoor use only. Never operate the device without continuous water circulation, never leave an active fire unattended and regularly monitor the water temperature during use.