4 x Electrician Needle 15 m, 4 mm Diameter Electric Pull Cable, Electric Wire Puller with 8 Guide Springs, Cable Thread for Laying Empty Tubes, Green, Red, Black, Blue

Suitable for empty, straight or slightly curved PVC tubes, over short distances. Diameter: 4 mm spiral for Ø 0.787 / 0.984 / 32 mm. Not suitable for ringed tubes, 90° tight multi-bend tubes, already busy or overloaded tubes or long distances with thick wire harnesses - use a stiffer fiberglass wire puller. Designed for short distances in empty and straight tubes – ideal for renovation cables: in the wall, pull network (LAN), monitoring, speakers and power cables; on the ceiling for lighting, smoke detectors and cameras; under the floor; as well as in the attic, cellar and in tight spaces such as car audio. Recommended push: approx. 5-8m per section. Set of 4: You will receive 4 x 15 m PET 1/4 inch pull strips (green, red, black, blue), each with a smooth galvanised steel pull head, plus 4 guide springs, 8 cable ties and 4 straps. The 4 distinct colour strips allow you to work on multiple routes and cover tube lengths up to approx. 12 m. Important: 4 individual strips of 15 m, not assembled in 60 m. The spring loaded head on the steel primer rotates 360°, guides the band in soft curves and reduces snagging. The clip securely connects cable and tape; the red cap prevents the cable from slipping when pulling. Push slowly and steadily; in case of resistance, remove and reposition - never force. The PET pull strip is flexible, aging-resistant, heat-resistant and non-conductive - for safety on power lines. Note: It is deliberately very flexible to negotiate smooth curves and designed for pulling - do not push long distances with strong pressure, otherwise it may bend.