3 Pcs 433MHz Copy Remote Opener, Universal Garage Door Controller Wireless Cloning Key Fob 4 in 1 Remote Control Duplicator, for Electric Gate Car Alarm doors Home Store Roller Shutters Smart Home

Product description

Enter a world of greater security and convenience with our 433MHz universal garage door remote. Crafted to be compatible with a wide range of devices, this wireless clone keychain replicator is the epitome of versatility, from electric doors and garage doors to keychains and a range of other devices.

Efficient and simple copying:

• Step 1: Press and hold the AB button of the new remote control at the same time until the indicator light flashes. Release the phone to clear the code successfully. Press any button and the indicator light will go out.

• Step 2: Place the new remote control next to the old remote control, then press and hold the A button of the new remote control and then press the A button of the old remote control to copy the a button of the old remote control to the a button of the new remote control. When the indicator light flashes three times quickly, it means the copy is successful. Use the same operation with the BCD button to copy.

• If useful codes are cleared by mistake, you can press the CD buttons on the bottom row of the remote control at the same time for 2 seconds before re-copying to other remote controls. After the indicator light flashes quickly, the recovery is successful.

• For users with low remote control transmission power, it is recommended to place the two remote controls back to back. If interference from surrounding electronic noise poses a challenge, move to a quieter location and try again.

Notes and Compatibility:

To reiterate, code removal can only be done on a copier, not the original.

In addition, our remote control is not a universal remote control and can be a remote control that copies some of the PT/HC2262, 2260, FP527, SMC918, PT2240 EV1527 microcontroller chip remote controls and other chips.