3/4" float valve, the water level control box is a version of the traditional float valve, used in swimming pools, livestock tanks, aquaculture, aquariums

Size: 3/4" white side Automatic float valve water level control valve. Working pressure range: 1-10 kg (0.1-1 MPa) Applicable medium: clean water Applicable average temperature: ≤70℃ High temperature medium temperature: 10° ~ 70° Type: Vertical Indoor Installation Material: Nylon + Rubber Outlet Diameter: 1/2 3/4" BSP Thread Size: Please refer to the left picture for detailed picture. Colour: as shown in the picture. Working Principle: When the surface of the water tower or pool drops, the float in the valve chamber flows. Use the hole rod to open the pilot hole of the control valve. Mount, press the joystick to close the pilot hole, the valve cavity begins to fill with water, then close the control valve. The sealing surface of the control valve immediately stops the water supply. What you get: 1 x Water Level Control Valve 1 piece as shown in the picture. Only the above package contents, other products are not included. Note: This product is a liquid level control valve. After installation, the float should be vertical. If you need to install it from above, you need an elbow to connect the float valve and the inlet pipe. First, fix the water inlet pipe on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard. The main water inlet should be aligned with the normal diameter of the control valve. When using, the shut-off valve must be fully opened. If two valves are installed in the same tank, they must be kept at the same level. Before installation, clean the impurities in the pipe to avoid blocks