2 Way Watering Programmer, Large LCD Display, Automatic Watering for Garden, Programmable Irrigation, Simple Use, Rain Delay, Manual Watering Function

Large LCD Display and Easy Programming: adjust settings using 4 buttons and a dial. No complicated submenus. All parameters are easy to read on the 3.4 inch LCD screen, which can display watering time, watering frequency, power and other detailed information. 2 Independent Zones: automatic watering timer has 2 independent outlets that irrigate 2 different zones via a single tap. Start time, duration and watering frequency can be programmed independently for each zone. Adapt automatic watering to the different needs of your plants, whether for drip watering or automatic sprinkler. Ready to use: start immediately in manual mode, choice for one or two zones. Turn the selector to ON, press the start button for a few seconds and set the watering time. Selectable duration in manual mode ranges from one minute to 8 hours. Permanent Watering in Automatic Mode: automatic watering works by itself. Ideal when you are on the business trip or on holiday. Meets daily watering timer needs, whether for indoor automatic watering or solar automatic watering, can be used in the garden, on the lawn, in the yard and other places. Rainy Time: interrupt watering schedule if a rainy front approaches (time intervals of 24, 48 or 72 hours). Ideal for saving water and preventing soil saturation. Once the time has elapsed, the preselected program continues to operate without change. How to disable an output that is not used: select the zone A or B, C, D to close. Turn the button to START TIMER. Click the - (DELAY) button until OFF appears.