12V Water Pump, 800L/H 5M, Submersible Electric Water Pump with Levels Speed Regulation for Ponds, Garden Fountain, Aquarium

The power cable is a two-wire cable. The wire is for the positive pole, the wire for the negative pole. Be careful not to reverse the negative pole in order to avoid damage to the pump. Before turning on the submersible pump, the hose must be connected to the water outlet. During the first use, it may happen that the discharge height does not yet reach the normal height due to the presence of air in the pump. In this case, turn the pump on and off several times until the air has completely escaped and the pump flows back normally again. Features: Function: level speed regulation Pump core: stainless steel bearing Voltage: DC Power: Max. flow rate: L/h Maximum discharge height: m Liquid Temperature Range: Drive type: electromagnetic drive, centrifugal pump Cable length: m Inlet and outlet diameter: cm What you get: x Small Water Pump x filter cover x suction cups x Nozzles x Hose Clamps x power adapter Note: Make sure the water stays clean: the pond pump cannot be disassembled or cleaned during operation. Be careful not to reverse the positive and negative poles of the water pump. The pump should not operate at too high pressure. Do not allow the pump to run without water for an extended period of time.