[Yuexinghui] (Unprocessed Intellectual Property) (ZH) ANENG SL103 60W Adjustable Temperature 180500℃ Digital Display Portable Soldering Tool Set (US Standard) 26 Pieces

1. Working voltage: AC 110V~240V 60W.2. Temperature range: 180~500℃, the error after calibration is less than +/-5℃.3. Use 900 series soldering iron tip, plug-in heating core.4. Tin time: 18~20s.5. Alarm: EAO heating element is open. Set temperature operation:(1) Press the + button once to increase the temperature, and long press the + button to increase the temperature continuously.(2) Press the button to decrease the temperature, long press the button to decrease the temperature continuously.(3) When there is no button for 3 seconds, the newly set temperature will be memorized, and the temperature will be kept at the next startup.(4) When the heating core reaches the set temperature, the temperature of the soldering iron tip can reach the set value after about 30~50s. Calibration operation: (Generally choose 320 degree calibration.)(1) Put the soldering iron tip on the thermometer after powering on for 90s, and add solder to the soldering iron tip to make the soldering iron tip and the thermocouple fully contact.(2) Wait for 2~4s after the thermometer shows that the temperature stabilizes, and record the temperature of the thermometer.(3) Remove the soldering iron from the thermometer and press + and at the same time to enter the temperature calibration interface.(4) Input adjustment amount:E.g:Set the temperature to 290°C, and the actual measured temperature is 282°C, then press to display 08°C on the LCD.Set the temperature to 290°C, and the measured temperature is 300°C, then press to display -10°C on the LCD.(5) Press the + and - button at the same time to exit the temperature calibration interface.Press # button once to switch C/F. Package included:1*Electric soldering iron1*Anti-static tweezers1*Digital multimeter (not including battery)1*Soldering iron bracket1*Tin suction device1*Thermocouple1*Zipper storage bag1*Tin wire6*Soldering tool1*Rosin2*Multimeter test line1*Soldering iron tip silicone protective cover5*Soldering iron tip1*Cutting pliers1*Maintenance copper wire1*Tester (not including battery)