Station de soudage et dessoudage 2-en-1 réglable, kit d'outils de fer à souder professionnel, machine de rework 220V prise UK

Output Power

90W(Maximum)

Input Voltage

AC 28V 50Hz

Temperature Range

180℃-480℃

Soldering Iron to Ground Resistance

≤2Ω

Soldering Iron to Ground Voltage

≤2mV

How to Use:

No.1 Installation

When the new machine is used for the first time, the heat air gun bracket must be installed.

1. Align the two mounting holes of the handle bracket with the two fixing screw holes on the machine, and tighten the two screws that have been removed.

2. Put the handle assembly on the handle bracket and check if it is suitable.

No.2 Power On

Turn on the power and turn on the main power switch on the rear panel of the machine. When the two heating switches are not turned on, the screen displays the standby state "---", and any heating switch is turned off.

No.3 Work

Turn on any heating switch, the screen displays the actual working status.

No.4 Stop Working

Turn off the currently working heating switch, the machine stops heating, then the machine is in the standby state "---".

No.5 Shutdown

After using the hot air gun, please put the handle of the hot air gun on the handle holder, and turn off the heating switch after the hot air has fallen to sleep. This will greatly extend the service life of the hot air gun. If the whole machine does not need to work, please turn off the heating switch and turn off the main power switch on the rear panel of the machine.

No.6 The Dormant State of The Desoldering Station

When the desoldering station is not used for the time being, please place the handle of the desoldering station on the bracket until the dormant time is set, the host will automatically cut off the desoldering station heating and enter the dormant state "---".

No.7 Wake Up The Desoldering Station from Sleep

After the desoldering station enters the dormant state, just pick up the handle again, the screen displays the working state, and resumes the previous settings.

No.8 Display Sign Description

1. Display "---" : It indicates that the desoldering station has entered dormancy state at this time.

2. Display "S-E": It indicates that the sensor or part of the working sensor currently displayed on the screen is faulty, and the machine stops outputting the heating signal at this time.

3. Display "H-E": It indicates that the heating elements or part of the working heating elements displayed on the current screen is malfunctioning. 1 x Main Machine

1 x Soldering Iron Handle

1 x Soldering Iron Bracket

1 x Hot Air Gun Bracket

1 x Power Cord

2 x Nozzle

1 x Cleaning Sponge

1 x User Manual