1/5
Repair Hail Removal T Bar Slide Hammer+18pcs Glue Puller--
(54,99€/pc)
Vous achetez pour votre entreprise ?
+10% offert sur votre 1ère commande
Tarifs négociés HT jusqu'à -20%
Produit similaire livré par
Blister de 3 câbles plug it H05 RN-F4/3 – Longueur 4 m – Section 1,5 mm² – Pour outils FESTOOL avec système plug-it
46,00 €
186
Vendu par ZENYTHIANS VENTURES LTD
Ces articles peuvent vous intéresser !
Comparer à des articles similaires
Souvent achetés ensemble
Informations produit
Description
Features:
1.High quality tools.
2.Automotive body repair tools.
Specifications:
Slide Hammer Color: Silver
Puller Tabs Color: Blue
material: Metal
How to use this paintless dent repair kits
1.Clean the dent with a clean wet cloth;
2.Mount the into the glue , pull the trigger to let the enter into the glue , connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Packing lncluded:
18x Glue Pulling Tabs
1x 2 in 1 Dent Removel T Bar Tools
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Caractéristiques
- MarqueZEVE
- Quantité par pack1
- Largeur10 mm
- MatièresMétal
- Réf. ManoManoME213292433
- MMID729174729219
- Réf. fabricantZY0422[CJ]-12177
- EAN4714522747843
Comment choisir son marteau
Les conseils de nos experts
Vous êtes ici :

















