Presse-étoupe Rutaseal PG7 pour bac. f.12,5 épaisseur 0,5-2 câble d.3-5
Produit similaire livré par
'/%3E%3C/svg%3E)
Joint pour presse-étoupe joint de graisse en coton Erica fils finement tressés Etanchéité Pompe Tourillon Axe Agitateur Arbre, 8x8mm longueur 50 centimètres
18,95 €
4
Vendu par Errebi shop
Ces articles peuvent vous intéresser !
Comparer à des articles similaires
Souvent achetés ensemble
Informations produit
Description
Code ErreBi: 20012
Prix au 5 pièces
Remarque: Quantité 1 correspond à 5 pièces
Exemple: Si vous achetez 3 quantités, vous recevrez 15 pièces
Characteristics: these cable glands exert a discreet anti-traction seal and, above all, ensure an IP 67 seal both on the 2 holes of the cable gland itself and on the wall mounting hole. They have a conical shape whose cone is blocked by a thin membrane. For correct installation, the cable glands must be mounted in the wall hole in the direction of the cone, but, depending on the application, they can be mounted on both sides of the wall so that the cone or the flat base can be seen externally. Subsequently, the cable is introduced from the side with the open hole and pushed until the membrane breaks and comes out of the cone, finally, the cable must be pulled in the opposite direction by approx. 1 cm. No tools are needed. They are made of EPDM which offers good resistance to atmospheric agents and diluted acids and excellent resistance to UV rays and ozone. Since EPDM is a soft material, these cable glands are the ideal solution for curved surfaces. Please note that these grommets also contain sulfur particles which could potentially have a negative effect on the LEDs.
Material: halogen-free EPDM.
Color: light gray Ral 7035
Use temperature: -40 ° C / + 110 ° C
IP protection: IP 67
Inner diameter: 3-5 mm
Outside diameter: 20 mm
Thickness: 0.5-2 mm
Panel hole: 13 mm
Prix au 5 pièces
Remarque: Quantité 1 correspond à 5 pièces
Exemple: Si vous achetez 3 quantités, vous recevrez 15 pièces
Characteristics: these cable glands exert a discreet anti-traction seal and, above all, ensure an IP 67 seal both on the 2 holes of the cable gland itself and on the wall mounting hole. They have a conical shape whose cone is blocked by a thin membrane. For correct installation, the cable glands must be mounted in the wall hole in the direction of the cone, but, depending on the application, they can be mounted on both sides of the wall so that the cone or the flat base can be seen externally. Subsequently, the cable is introduced from the side with the open hole and pushed until the membrane breaks and comes out of the cone, finally, the cable must be pulled in the opposite direction by approx. 1 cm. No tools are needed. They are made of EPDM which offers good resistance to atmospheric agents and diluted acids and excellent resistance to UV rays and ozone. Since EPDM is a soft material, these cable glands are the ideal solution for curved surfaces. Please note that these grommets also contain sulfur particles which could potentially have a negative effect on the LEDs.
Material: halogen-free EPDM.
Color: light gray Ral 7035
Use temperature: -40 ° C / + 110 ° C
IP protection: IP 67
Inner diameter: 3-5 mm
Outside diameter: 20 mm
Thickness: 0.5-2 mm
Panel hole: 13 mm
Caractéristiques
- MarqueERREBI GROUP
- Largeur2 cm
- CouleurGris clair
- Quantité par pack5
- Garantie2 an(s)
Vous êtes ici :
Catégories associées
Presse a buche
Presse électrique
Presse pneumatique
Presse 30t
Presse 30 tonnes
Presse hydraulique 12 tonnes
Outils presse hydraulique
Accessoires presse hydraulique
Presse hydraulique manuelle
Presse hydraulique 50 t
Presse hydraulique 20t
Presse hydraulique électrique
Presse hydraulique 30t
Presse hydraulique d'établi
Presse hydraulique 20 tonnes
Presse hydraulique 30 tonnes
'/%3E%3C/svg%3E){kind=small}