Poe Splitter USB-C 5V Gigabit Poe USB-C Adapter IEEE 802.3af Compliant for IP

Description

100% brand new and high quality.
Gigabit PoE splitter to split PoE signal to 5V USB-C power supply and Gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.
Deliver power and data with a single Ethernet cable for fewer wall outlets and messy cables.
Extend power line to locations where there are no wall outlets nearby, up to 300 feet from the power source.
A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and take full advantage of PoE switches, or for a Raspberry Pi 4 configuration where a PoE HAT is not applicable.
You will need an IEEE 802.3af compliant PoE switch or injector that acts as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to power the splitter.

Note:
1. This splitter does not support PD or QC fast charging protocols.
2. This splitter provides a maximum output of 3A with its 802.3af compliance.
3. Simply put the split Ethernet cable aside if you don't need data.
4. The split Ethernet cable no longer supplies power.

Product Specifications

● Compatibility: IEEE802.3af/at
● Output: 5V / 3A
● Data Rate: 10/100/1000Mbps (Gigabit)
● Input: DC 44-57V
● Size: approx. 78 x 28mm (3.07 x 1.10in)
● Features: Splits PoE to USB-C power and RJ45 Ethernet, plug-and-play, extends up to 300 feet
● Application: Non-PoE devices, Raspberry Pi 4, 5V USB-C devices

Packing List

● 1pc x Gigabit PoE Splitter

General Description

This Gigabit PoE splitter converts an IEEE 802.3af/at PoE signal into 5V/3A USB-C power and Gigabit Ethernet data.
It allows non-PoE devices to be powered and connected via a single Ethernet cable up to 300 feet away.
Ideal for Raspberry Pi 4 or other USB-C devices, it does not support fast charging protocols.
Please allow 0-1cm measurement error and note possible color variations due to monitor differences.