Mini 12V 2A Black Carbon Steel Electromagnetic Lock for Smart Drawers and

The lock can be opened via intercom with a little DIY. You just need to send a pulse of 12v and 2 amps, so provide a small relay in case of lack of power with a 12v 3 amp power supply. to secure closets, so that children cannot access. The lock should not be powered for more than 3 seconds and the voltage should be 12V 2A. If you use a relay with a digicode and when you unlock, everything goes off. Because the power supply is not powerful enough it is necessary to power the coil apart or put a dedicated power supply to the lock. The electric lock is a steel plate for shell and carbon steel for the inner material. Strong and safe to use. Shockproof, puncture proof and anti-theft protection. Mechanical life, when designing the load condition, about 500,000 times. Suitable for door from 0.5 to 4 kg. Compact, magnetic electromagnet lock for easy installation, no left, right, front, rear limitation and allowing a mechanical release position of the tabs. Built-in unlock status detection. Size: approx. 5.5 x 7 x 1.5 cm. Application for delivery lockers, refrigerated cabinet, mail or newspaper box, self-service locker, book counter, clothes cabinet, etc The locking hook can withstand a pull of 150 kg, it will not necessarily be permanently deformed, shockproof, anti-indiscrete. There are 2 elements, the fixed part painted black and the metal hook. We have to slam the door to close it and put 12v on the wires to unlock. The electromagnetic lock is mainly carbon steel material, the lock hook can bear 150kg pull.