Manual Above Ground Pool Vacuum Cleaner, Pool Vacuum for Garden Hose, Hydraulic Spa

This pool vacuum cleaner uses a garden hose as an energy source (Note: a garden hose with an internal diameter of 12mm is required for connection), the water in the hose enters the pool cleaner to produce strong suction power, and the leaves and dirt are sucked into the filter bag. The length of 1.5m increases the working area of the pool vacuum cleaner, which is enough to easily handle scenarios of small and medium family pools such as above ground pools, garden ponds, spas and pools with aquatic decorative elements. Based on previous years' experience, we have updated the installation process of vacuum cleaner accessories. The combination between accessories is firmer and stable enough to withstand strong water pressure and vacuum air pressure. It does not disassemble under strong pressure and can do its job better. You don't need to buy extra power or vacuum machine as a power source, and you don't need to buy an expensive vacuum machine, just connect the garden hose to use it (if the connection is loose, it is recommended to use industrial tape). Attach the water hose and vacuum cleaner interface, it is a perfect solution for home use. The connection of the pool vacuum cleaner must be connected to a garden hose with an inner diameter of 12 mm. If the rope loop of the filter bag cannot be fixed, it is recommended to use the filter bag rope directly to tie it. For more installation and use instructions, click to view our product videos.