BERM@ (Authorized) 150W Switching Power Supply, LED Power Supply, Medical Power Supply, 85264VAC, LRS-150-12

1、The input range of AC voltage and current value can be adjusted by switch. 2、There is an LED indicator for booting, and it is safer to use under the rated output power. 3、Built-in over-voltage, over-current and short-circuit protection functions can extend the service life. 4、The switching power supply is small in size, with high efficiency and high reliability. 5、Made of aluminum and PCB materials, it has passed the full load aging test, and the maximum operating temperature can up to 70℃.Item Type: Power Supply Material: Aluminum and PCB Purpose: Power supply Parameters (12V And 24V Models): 1. Output Value: DC Voltage: 12V / 24V Rated Current: 12.5A / 6.5A Current Range: 0-12.5A / 0-6.5A Rated Power: 150W / 156W Ripple and Noise (maximum): 150mVp-p / 200mVp-p Voltage Adjustment Range: 10.2-13.8V / 21.6-28.8V Withstand Voltage: ±1.0% / ±1.0% Line Adjustment: ±0.5% / ±0.5% Load Regulation: ±0.5% / ±0.5% Rise Time: 500ms, 30ms / 230VAC; 500ms, 30ms / 115VAC (full load) Holding Time (Typical Value): 16ms / 230VAC; 12ms / 115VAC (full load) 2. Input Value: Voltage Range: 85-264VAC; 120-370VDC Frequency Range: 47-63Hz Efficiency (Typical Value): 87.5% / 89% AC Current (Typical Value): 2.8A / 115VAC, 1.6A / 230VAC Inrush Current (Typical Value): 60A / 230VAC Leakage Current: <0.75mA 240VAC 3. Protection: Overload: 110-140% of Rated Output Power Protection Type: Hiccup mode, automatic recovery after the fault condition is eliminated 4. Environment: Working Temperature: -20-+70℃ Working Humidity: 20-90%RH non-condensing Storage Temperature and Humidity: -40-+85℃, 10-95%RH Temperature Coefficient: ±0.03%℃(0-50℃) Vibration: 10-500Hz, 5G, 10 minutes/per cycle, 60 minutes each along the X, Y, and Z axes 5. Safety and EMC: Safety Standards: EN60950-1, EN60335-1, EN61558-1 approved. Withstand Voltage: I/P-0/P: 1.5KVAC I/P-FG: 1.5KVAC 0/P-FG: 0.5KVAC Isolation Resistance: I/P-O/P, I/P-FG, 0/P-FG: 100M Ohms / 500VDC/25℃/ 70% RH How to use: It can be used when connected to the current line, L is connected to the live wire, N is connected to the neutral line, +v is connected to the output positive pole, -v is connected to the output negative pole, the white regulator can realize the fine adjustment of the voltage, and the ground wire is the ground wire interface.Size: Approx. 159 x 97 x 30mm / 6.3 x 3.8 x 1.2in1 x Power Supply