1/5
BERM@ (Authorized) 120W Switching Power Supply, LED Power Supply, Medical Power Supply, 85264VAC, LRS-120-24
(27,99€/pc)
Vous achetez pour votre entreprise ?
Tarifs négociés HT jusqu'à -20%
Produit similaire livré par
'/%3E%3C/svg%3E)
Einhell Bloc d’alimentation USB TC-CP 18 Li USB A/C-Solo PXC (18 V, 1 prise USB-A, 1 prise USB-C) Livré sans Batterie ni Chargeur
19,95 €
28
Vendu par MCKENSA LTD
Ces articles peuvent vous intéresser !
13 options
Alimentation pour bande LED V-TAC 78 W 12 V 6,5 A Plug&Play Jack 2.1 Câble 2,4 m avec prise IP44
36
13 options
Alimentation plastique V-TAC 100 W 12 V 8,5 A 1 sortie Câble à souder Blanc 192 x 52 x 37 mm IP65
36
Barcelona Led – Bloc d'alimentation 12V 5A courant constant – 60W étanche IP67 – Transformateur pour luminaire – Usage professionnel
28
Livraison gratuite
Barcelona Led – Transformateur étanche 12V 3A 36W – Alimentation LED pour éclairage intérieur – Protection contre court-circuit et surtension
81
Livraison gratuite
N°1 des ventes
Driver LED 40W – Transformateur 220-240V AC – Sortie 25-42V DC 900mA – Alimentation pour dalle 600x600 – IP20 – Lifud
52
Comparer à des articles similaires
Informations produit
Description
1、The AC input range can be selected by the switch, which is very convenient to use.
2、This power supply can withstand 300VAC surge current for 5 seconds without damage.
3、There is an LED indicator for booting, which can withstand 5G vibration test.
4、After 100% full load aging test, the maximum working temperature can get 70℃.
5、With great workmanship, with high efficiency, long service life and high reliability.Item Type: BERM Switching Power Supply
Material: Aluminum, PCB
Purpose: Power supply function
Output Value:
DC Voltage: 12V/ 24V
Rated Current: 10A/ 5A
Current Range: 0~10A/ 0~5A
Rated Power: 120W
Ripple and Noise (maximum): 120mVp-p/ 150mVp-p
Voltage Adjustment Range: 10.2 ~ 13.8V/ 21.6 ~ 28.8V
Withstand Voltage: ±1.0%/ ±1.0%
Line Adjustment: ±0.5%/ ±0.5%
Load Regulation: ±0.5%/ ±0.5%
Setting, Rise Time: 500ms, 30ms/ 230VAC; 500ms,30ms/ 115VAC (full load);
Holding Time (typical Value): 55ms/ 230VAC; 10ms/ 115VAC (full load);
Input Value:
Voltage Range: 85~264VAC; 120~373VDC (withstand 300VAC surge current for 5 seconds without damage)
Frequency Range: 47 ~63Hz
Efficiency (typical value): 88%/ 90%
AC Current (typical value): 2.3A/ 115VAC 5A/ 230VAC
Inrush Current (typical value): 50A / 230VAC
Leakage Current: <0.75mA240VAC
Protection:
Overload: 110~150％ of rated output power; protection type: Hiccup mode, automatic recovery after the fault condition is eliminated
Surroundings:
Working Temperature: -20~+70℃
Working Humidity: 20~90%RH non-condensing
Storage Temperature and Humidity: -40~+85℃, 10~95%RH
Temperature Coefficient: ±0.03% ℃ (0 ~ 50℃)
Vibration: 10 ~ 500Hz, 5G 10 minutes/1 cycle, 60 minutes each along the X, Y, and Z axes.
Safety and EMC:
Safety Standard: EN60950-1, approved.
Withstand Voltage: I/P-0/P: 1.5KVAC I/P-FG: 1.5KVAC 0/P-FG: 0.5KVAC
Isolation Resistance: I/P-O/P, I/P-FG, 0/P-FG: 100M Ohms / 500VDC/25℃/ 70% RHHow to Use: Can be used when connected to the current line, L is connected to the live wire, N is connected to the neutral line, +v is connected to the output positive pole, -v is connected to the output negative pole, the white regulator can be used for fine adjustment, and the ground wire identification is the ground wire interface.
1 x Power Supply
Caractéristiques
- MarqueMCKENSA
- Destination de l'alimentationLuminaire
- MatièresAluminium
- Technologie d'alimentationÀ découpage
- Type de courant d'entréeAC
- Réf. ManoManoME251789279
- MMID894027987412
- Réf. fabricantKN09014[KN]-349922
- EAN7093185337262
Vous êtes ici :
'/%3E%3C/svg%3E){kind=small}