4 Kits Professional Auto Dent Repair Tool Kit, Paintless Car Body Metal Sheet Puller, Hail Pit Extractor, Rubber Hammer Set, Available

Kit 4, Features: Made from quality material, durable to use. Can help you repair dents on your car. It will not harm painted surfaces. Suitable for treating car sheet metal, refrigerators, motorcycles, washing machines, etc. Steps for use: 1. Clean the surface with a clean, damp cloth. 2. Stick the glue stick into the gun, turn it on and heat it for 5 to 10 minutes. 3. Choose the glue pull tab according to the size of the dent, then place the heated glue onto the pull tab, immediately place the pull tab at the center of the dent and hold it until it sticks. 4. Let the glue cool for about 8 to 10 minutes. Cooling time should be less than 10 minutes, and slightly shorter in winter. 5. Once the glue has cooled, align it with a T-bar puller or bridge dent puller and press the puller to pull the dent upward. Repeat the above steps until the dent disappears. 6. Once the dents are done, use 95% alcohol to clean the remaining glue on the car body surface with a plastic scraper. 【Kit 1-76Pcs】 The package includes: 12x red tabs 28x blue tabs 1x long T-bar puller 2x scraper 1x glue gun (US/EU plug, 20W) 5x white glue sticks (7*270mm) 5x yellow glue sticks (7*270mm) 1x towel 1 bottle of alcohol (alcohol not included) 1x hammer 10x tapping pen 1x tool bag 1x instruction 7 x pull bridge set 【Kit 2-69Pcs】 The package includes: 12x red tabs 28x blue tabs 1x long T-bar puller 2x scraper 1x 20W glue gun (US/EU plug) 5x white glue sticker 5x yellow glue sticks 1x towel 1 bottle of alcohol (alcohol not included) 1x instruction 1x tool bag 1x hammer 10x tapping pen 【Kit 3-58Pcs】 The package includes: 12x red tabs 28x blue tabs 1x long T-bar puller 2x scraper 1x glue gun (US/EU plug, 20W) 5x white glue sticks (7*270mm) 5x yellow glue sticks (7*270mm) 1x towel 1 bottle of alcohol (alcohol not included) 1x tool bag 1x instruction 【Kit 4 (without glue)】 20x blue tabs 1x puller 1x towel 2x scraper 1x instruction Question 1: The glue is not strong, the glue came off, what is the reason? 1. The viscosity of hot melt adhesive is related to temperature. The ideal temperature is 20°C-28°C. Note: do not use under the sun in summer, and the operating temperature in winter should be above 10°C (if the weather is very cold, you can first pour hot water on the car panel in the dent) 2. If the car has been waxed or coated with a crystal film or if the dent material is not iron sheet, the adhesion of the tape will be greatly affected. 3. The product may be dusty during use. Before use, it is best to use alcohol to clean the rubber band, the dent surface and the joint. 4. If it comes off during operation at the ideal temperature, this is a normal phenomenon, and it is enough to repeat the operation. If the dent cannot be repaired after repeated operations, it may be that the puller is not suitable for treating the dent. This is related to the shape, position and size of the dent. Not all dents can be repaired with a single product, which has nothing to do with the glue. Question 2: How to remove the glue You can use alcohol above 95 degrees, while tearing it again and spraying alcohol, the residual glue can be removed with your nails. Asphalt, gasoline or diesel can also be used. (As alcohol is flammable and cannot be transported, please buy it locally. Sorry for the inconvenience caused.) Note: 1. It is not recommended to use it if the car body has been waxed, if there is a car cover, a film has been applied or if the paint surface is cracked. 2. The dent is not sheet metal, or the dent is in a particularly hard place such as the body beam and cannot be repaired with tools.