3-37Pcs US PWS Car Dent Repair Tool Kit with Slide Hammer, T-Bar Puller, Suction Cup and Blue Glue Tabs, Paintless Dent Removal Set Plug

Set 3-37Pcs(US Plug), Features: 1. The slide hammer is more powerful for repairing dents, conquering large dents. 2. The principle is to make the glue tabs stick to the dent and use tools to pull the tabs and lift the dent. 3. Big dent needs a slide hammer or PWS puller; small dents need a mini dent lifter or a pull bridge. 4. Different tabs for different dent pullers or the slide hammer, works with all glue extractors. 5. Use a slide hammer or a dent lifter or any pulling tool to lift the dent, try several times. How to use: 1. Clean the dent with a clean, damp cloth; 2. Mount the glue stick in the glue gun, press the trigger to let the glue stick enter the glue gun, connect the power source and preheat for 5 minutes; 3. Use a suitable drawing tab. A large dent requires a large drawing tab. 4. Press the trigger and apply the drawing tab with extruded glue; 5. Quickly place the drawing tab with hot melt glue at the center of the dent, press lightly until the glue hardens and adheres; 6. Align the PWS T-shaped repairer and press on the drawing tab with hot melt glue, pull the sliding rod backward to pull the dent; 7. Check with a line card. If the dent still exists, tap it lightly with a hammer or a flattening pen; 8. Clean the repaired area with a clean, damp cloth. Question 1: The glue is not strong, the glue came off, what is the reason? 1. The viscosity of the hot melt adhesive is related to temperature. The ideal temperature is 20 °C-28 °C. Note: do not use under the sun in summer, and the operating temperature in winter is above 10 ℃ (if the weather is very cold, you can first pour hot water on the car panel in the dent) 2. If the car has been waxed or coated with a crystal film or if the dent material is not sheet iron, the adhesion of the tape will be greatly affected. 3. The product may be dusty during use. Before use, it is best to use alcohol to clean the rubber strip, the dent surface and the tab. 4. If it comes off during operation at the ideal temperature, this is a normal phenomenon, and it is enough to repeat the operation. If the dent cannot be repaired after repeated operations, the puller may not be suitable for treating the dent. This is related to the shape, position and size of the dent. Not all dents can be repaired with a single product, which has nothing to do with the glue. Question 2: How to remove the glue? You can use alcohol above 95 degrees, while tearing it again and spraying alcohol, the residual glue can be rubbed off with your nails. Asphalt, gasoline or diesel can also be used. (Because alcohol is flammable and cannot be shipped, please buy it locally. Sorry for the inconvenience caused.) Note: 1. It is not recommended to use it if the body has been waxed, if there is a car cover, a film has been applied or if the paint surface is cracked. 2. The dent is not sheet metal, or the dent is in a particularly hard place such as the body beam and cannot be repaired with tools. If there is a problem during the repair process, please contact us, we will provide you with professional online advice. Note: the alcohol bottle in this set is an empty bottle for liquid release agent without alcohol Package Included: [Set 2-26 pieces]: 23 short blue tabs (23 sizes) 1x T-bar Tool 2x Scraper Tools [Set 1-8 pieces]: 4 * Long blue tabs (2 sizes) 2 * Holders (2 Sizes) 1x T-bar Tool 1x Scraper Tool [Set 3-37 pieces]: 23 short blue tabs (23 sizes) 4 * Long blue tabs (2 sizes) 2 * holders (2 sizes) 1x T-bar Tool 1x Glue Gun 20W (EU plug) 3x Yellow Glue Sticks 1x Yellow Scraper 1x Blue Towel 1x Alcohol Bottle (alcohol not included) [Set 3-37Pcs(US Plug)]: 23 short blue tabs (23 sizes) 4 * Long blue tabs (2 sizes) 2 * holders (2 sizes) 1x T-bar Tool 1x Glue Gun 20W (US plug) 3x Yellow Glue Sticks 1x Yellow Scraper 1x Blue Towel 1x Alcohol Bottle (alcohol not included) Description: This PWS paintless dent repair T-bar puller is a lightweight glue tab pulling tool, intended for use when repairing pressure dents and any dent that is not sharp or crumpled. The tension puller works well with a tapping hammer when pulling large dents. It is very easy to control, anyone can remove the dent easily by themselves.