2600mAh precision cordless soldering iron, 3 adjustable temperatures (572-842 °F), built-in LED, ideal for soldering small components, electric soldering iron kit and welding tools

Remove the cap to prevent the tip from loosening. Do not place the cap, not heat-resistant, on the hot iron. This iron uses a rechargeable battery of 2600mAh with 3 modes: green (300-350°C, 120 min), blue (350-380°C, 90 min), red (400-450°C, 60 min). The usage time varies depending on the task. If the green mode exceeds 120 min, the battery will run out and the mode will no longer change. The kit includes three tips (one pre-installed), additional tips available in store. The 2600mAh battery (18650, standard size) offers a battery life according to the mode: green (300-350°C, 1.3A, 2 h), blue (350-380°C, 1.73A, 1.5 h), red (400-450°C, 2.6A, 1 h). Usage time may vary depending on tasks, temperature or wear. For prolonged use or high power, a replacement battery is recommended. If the battery is empty, remove it and continue with a Type-C cable. To preserve the battery, avoid using the iron while charging. Install the battery correctly (positive and negative polarity). Plug in the Type-C cable, the indicator light will light up in low red. Do not hold down the "O" button to start, let the device charge. After about 4 hours, the indicator light will change from red to green, indicating that charging is complete. The iron stays cool while charging. Once charged, unplug the cable and use the iron. Any questions, please contact our after-sales service by video or message. In battery-free mode, the iron works via a Type-C cable. In standby mode, the faint red LED indicates that it is not heating up. In Type-C mode, hold the "O" button for 5 seconds to heat up (green LED), then press to switch to blue, red, and again to return to standby (red LED weak). In battery mode, connect the poles correctly. Hold "O" for 5 seconds to turn on (green LED), then press to switch to blue, red, and a fourth press turns it off. Duration varies depending on the mode. In battery or Type-C mode, the LED indicator lights up automatically to illuminate the work area, ideal for electronic repairs. Wait for the tip to cool before covering it. Use protection, keep the area ventilated and place the device away from flammable materials, out of reach of children and pets. If not used, remove the battery and clean the tip. Check and replace regularly for wear and tear. For any help, contact.