Contrôleur de ruban LED 2 en 1 monochrome + CCT, variateur sans fil RF 2,4G avec télécommande pour ruban LED 2835/COB/CCT, 12-24V 144W-288W (pile non incluse dans la télécommande)

[2 in 1 Controller Kit] - Compatible with two kinds of LED strips: monochrome LED strips (single color only) and adjustable CCT LED strips. The kit contains a control box and a touch RF remote/dimmer. Freely adjust the color, desired brightness in different modes (Please read the manual settings carefully and choose the right mode according to the light strip you connected). [High Power Half Key RF Remote Control] - The maximum output power is 12A, you can control multiple light strips without worrying about overcharging. When using this controller to control a monochrome light strip, please note that the red wire must be connected to the "V+" output and the black wire connected to the "WW" or "CW" output. If the black wire is connected to the "GND" output, the light strip turns on, but the RF controller does not work. [Multifunctional] - You can adjust the brightness of both types of strips, CCT color temperature can be set between 2700K and 6500K (warm white to white). It supports group control/multi-zone control. Timer settings. Device sharing. There is a self-adhesive strip behind the RF controller, which can be attached to a fixed place, don't worry about it being lost. (Remote control battery not included) [Automatic Transmission Function] - One controller can transmit RF remote control signal to another/multiple controllers within 30m. Only for remote dimming. Please make sure the LED strips within 30m have a controller and the remote control distance can be infinite. All controllers must be in the same group. [Application] - The kit can be used with single color 2835, COB LED strip and CCT LED light. Input/Output Voltage: DC12-24V Maximum output: 12A/channel (total maximum output 12A) 2.4GHz RF remote control distance: 30m